Latest [Nov 24, 2023] HPE0-S59 Exam Questions – Valid HPE0-S59 Dumps Pdf
HPE0-S59 Practice Test Questions Answers Updated 60 Questions
Upon passing the HPE0-S59 certification exam, candidates will earn the HPE ATP - Server Solutions V4 certification. HPE Compute Solutions certification validates the candidate's knowledge and skills in implementing HPE compute solutions and is recognized by employers worldwide. It also demonstrates the candidate's commitment to professional development and their ability to stay up-to-date with the latest industry trends and technologies.
To prepare for the exam, candidates are encouraged to review the HPE0-S59 exam objectives and study materials provided by Hewlett Packard Enterprise. There are also a variety of training courses and certification programs available that can help candidates develop the knowledge and skills necessary to pass the exam. Overall, passing the HP HPE0-S59 exam demonstrates a high level of expertise in HPE compute solutions and can open up new opportunities for IT professionals in the field.
HP HPE0-S59 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 34
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- B. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- C. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- D. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- E. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- F. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
Answer: B,E
NEW QUESTION # 35
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if both FiexNICs are connected to different networks
- B. If the logical enclosure is built on at least three HPE Synergy frames
- C. if both FiexNICs are configured with the same speed
- D. if the logical enclosure is configured with redundant master modules
Answer: C
NEW QUESTION # 36
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
NEW QUESTION # 37
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- B. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
- D. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
Answer: C
NEW QUESTION # 38
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
Answer:
Explanation:
NEW QUESTION # 39
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
NEW QUESTION # 40
What is one of me benefits of using HPE Composer 2?
- A. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- B. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- C. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
Answer: B
NEW QUESTION # 41
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The customer has to create a new logical enclosure for the additional frame
- B. The customer can grow the existing logical enclosure up to 5 frames
- C. The additional frame cannot have 12Gb SAS connection modules installed
- D. The additional frame must have HPE Virtual Connect FC modules installed
Answer: A
NEW QUESTION # 42
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE Composer Maintenance Console
- B. HPE OneView Global Dashboard
- C. HPE OneView Firmware Compliance Report
- D. HPE OneView Update Readiness Checker
Answer: A
NEW QUESTION # 43
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 44
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using Windows Disk Management
- B. Remove the offline disks using array management tools
- C. Install and configure MPIO on me Windows system
- D. Disable deduplication for this volume at the array level
Answer: C
NEW QUESTION # 45
Which statement about manual orchestration during the firmware update is true?
- A. It provides an ability to select and update one side of the Interconnect topology at a time
- B. It allows all the interconnect modules to be activated manually at the same time.
- C. It provides the ability to install an older firmware version than currently Installed In the interconnect
- D. It is supported only for logical enclosures with at least three frames
Answer: A
NEW QUESTION # 46
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- C. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- D. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
Answer: D
NEW QUESTION # 47
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- B. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- C. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- D. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
Answer: A
NEW QUESTION # 48
Which compute node parameters are captured within server hardware type?
- A. installed operating system
- B. Size of the memory Installed
- C. Number of the CPUs
- D. Mezzanine card configuration
Answer: A
NEW QUESTION # 49
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
Answer:
Explanation:
NEW QUESTION # 50
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 51
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All logical interconnects configured using this logical Interconnect group will report inconsistency
- C. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- D. All logical interconnects configured using this logical interconnect group will be automatically updated
Answer: A
NEW QUESTION # 52
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
- B. It cannot be mixed with Gen9 compute modules in the same frame.
- C. It only supports NVDIMM Persistent Memory.
- D. It supports 8 memory channels and memory DIMMs of up to 256GB.
Answer: C
NEW QUESTION # 53
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there is at least one ISCSI network configured that will provide access to the module.
- B. If there Is a logical interconnect created based on the 12Gb SAS switches.
- C. If the D3940 module is imported in managed state that allows volume provisioning.
- D. If the D3940 storage module is property licensed through HPE OneView interface.
Answer: C
NEW QUESTION # 54
......
HPE0-S59 dumps Sure Practice with 60 Questions: https://validtorrent.pdf4test.com/HPE0-S59-actual-dumps.html
