Free FCP_FGT_AD-7.6 Sample Questions and 100% Cover Real Exam Questions (Updated 45 Questions) [Q13-Q38]

Free FCP_FGT_AD-7.6 Sample Questions and 100% Cover Real Exam Questions (Updated 45 Questions)

Download Real Fortinet FCP_FGT_AD-7.6 Exam Dumps Test Engine Exam Questions

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.
Topic 2	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.
Topic 3	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
Topic 4	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 5	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.

 

NEW QUESTION # 13
You have configured the FortiGate device for FSSO. A user is successful in log-in to windows, but their access to the internet is denied.
What should the administrator check first?

• A. The windows event viewer for failed login attempts.
• B. The FortiGate firewall policy settings for SSL decryption.
• C. The FortiGate FSSO active users list for user's IP address.
• D. Whether the user is assigned to the correct AD group.

Answer: C

Explanation:
Checking the active users list verifies if FortiGate correctly associates the user with their IP address, ensuring proper policy enforcement for internet access.

NEW QUESTION # 14
Which two statements about equal-cost multi-path (ECMP) configuration on FortiGate are true? (Choose two.)

• A. If SD-WAN is enabled, you control the load balancing algorithm with the parameter load-balance-mode.
• B. If SD-WAN is disabled, you can configure the parameter v4-ecmp-mode to volume-based.
• C. If SD-WAN is enabled, you can configure routes with unequal distance and priority values to be part of ECMP.
• D. If SD-WAN is disabled, you configure the load balancing algorithm in config system settings.

Answer: A,B

Explanation:
When SD-WAN is disabled, FortiGate supports volume-based ECMP mode via the v4-ecmp-mode parameter.
When SD-WAN is enabled, the load balancing algorithm is controlled by the load-balance-mode parameter within the SD-WAN configuration.

NEW QUESTION # 15
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

• A. The Underlay zone contains no member.
• B. The virtual-wan-link and overlay zones can be deleted.
• C. The Underlay zone is the zone by default.
• D. port2 and port3 are not assigned to a zone.

Answer: C

Explanation:
The Underlay zone is the default SD-WAN zone, typically representing the physical interfaces in the SD-WAN configuration before overlay or virtual links are added.

NEW QUESTION # 16
Refer to the exhibit.

The exhibit shows the FortiGuard Category Based Filter section of a corporate web filter profile.
An administrator must block access to download.com, which belongs to the Freeware and Software Downloads category. The administrator must also allow other websites in the same category.
What are two solutions for satisfying the requirement? (Choose two.)

• A. Configure a separate firewall policy with action Deny and an FQDN address object for*.download.com as destination address.
• B. Set the Freeware and Software Downloads category Action to Warning.
• C. Configure a static URL filter entry for download.com with Type and Action set to Wildcard and Block, respectively.
• D. Configure a web override rating for download.com and select Malicious Websites as the subcategory.

Answer: A,C

Explanation:
Creating a static URL filter to block download.com specifically allows blocking that site without affecting the entire category.
Using a separate firewall policy with a Deny action for an FQDN address object matching download.com can also block the site while allowing others in the same category.

NEW QUESTION # 17
When configuring a FortiGate in a multi-WAN setup, why would an administrator enable session preservation on an interface?

• A. To allow the FortiGate to dynamically change interfaces for all active sessions when a WAN link fails
• B. To ensure that existing SSL VPN connections remain on the same interface even if route changes occur
• C. To make sure all sessions without source NAT enabled always use the primary WAN link
• D. To improve security by forcing users to authenticate again when the WAN link changes

Answer: B

Explanation:
Session preservation keeps active sessions, such as SSL VPNs, tied to the original interface to prevent disruption when WAN routes change.

NEW QUESTION # 18
Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route.
Why is the administrator not able to select the new address in the Destination field of the new static route?

• A. In the new firewall address, the FQDN address must first beresolved.
• B. In the new static route, the administrator must select Named Address.
• C. In the new firewall address, Routing configuration must be enabled.
• D. In the new static route, the administrator must first set the interface to port2.

Answer: C

Explanation:
To use an FQDN-based address object as a destination in a static route, the "Routing configuration" option must be enabled in the firewall address settings. Without this, the address cannot be selected for routing.

NEW QUESTION # 19
Refer to the exhibit.

An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?

• A. The ABC.Com is hitting the category Excessive-Bandwidth.
• B. The ABC.Com Action is set to Allow.
• C. The ABC.Com Type is set as Application instead of Filter.
• D. The ABC.Com is configured under application profile, which must be configured as a web filter profile.

Answer: B

Explanation:
When the action is set to Allow in an application override, traffic matching this override is allowed without generating security logs because it bypasses deeper inspection and blocking.

NEW QUESTION # 20
Refer to the exhibit.

The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity.
What must the administrator configure to answer this specific request from the NOC team?

• A. Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.
• B. Move NOC_Access to the top of the list to ensure all profile settings take effect.
• C. Increase the admintimeout value under config system accprofile NOC_Access.
• D. Ensure that all NOC_Access users are assigned the super_admin role to guarantee access

Answer: C

Explanation:
The admintimeout setting in the admin access profile controls the inactivity timeout for GUI sessions. Increasing this value will extend the session duration before automatic disconnection.

NEW QUESTION # 21
A remote user reports slow SSL VPN performance and frequent disconnections. The user is located in an area with poor internet connectivity.
What setting should the administrator adjust to improve the user's experience?

• A. Configure the DTLS timeout to accommodate high-latency connections.
• B. Change the SSL VPN port to a non-standard port.
• C. Increase the session timeout for inactive sessions.
• D. Enable split tunneling to reduce VPN traffic.

Answer: A

Explanation:
Adjusting the DTLS timeout helps maintain SSL VPN stability and performance in environments with poor or high-latency internet connectivity by allowing more time for packet retransmissions before dropping the connection.

NEW QUESTION # 22
A new administrator is configuring FSSO authentication on FortiGate using DC Agent Mode.
Which step is NOT part of the expected process?

• A. FortiGate determines user identity based on the IP address in the FSSO list.
• B. The collector agent forwards login event data to FortiGate.
• C. The user logs into the windows domain.
• D. The DC agent sends login event data directly to FortiGate.

Answer: B

Explanation:
In DC Agent Mode, the DC agent sends login event data directly to FortiGate without involving a collector agent.

NEW QUESTION # 23
FortiGate is operating in NAT mode and has two physical interfaces connected to the LAN and DMZ networks respectively.
Which two statements about the requirements of connected physical interfaces on FortiGate are true? (Choose two.)

• A. Both interfaces must have IP addresses assigned.
• B. Both interfaces must have directly connected routes on the routing table.
• C. Both interfaces must have the interface role assigned.
• D. Both interfaces must have DHCP enabled and interfaces set to LAN and DMZ roles assigned.

Answer: A,B

Explanation:
Interfaces must have directly connected routes in the routing table to forward traffic correctly.
Interfaces must have IP addresses assigned to communicate within their respective networks.

NEW QUESTION # 24
Which two statements are true about an HA cluster? (Choose two.)

• A. An HA cluster cannot have both in-band and out-of-band management interfaces at the same time.
• B. Link failover triggers a failover if the administrator sets the interface down on the primary device.
• C. HA incremental synchronization includes FIB entries and IPsec SAs.
• D. When sniffing the heartbeat interface, the administrator must see the IP address 169.254.0.2.

Answer: B,C

Explanation:
Setting an interface down on the primary device triggers a failover due to link failover detection.
HA incremental synchronization includes forwarding information base (FIB) entries and IPsec security associations (SAs) to maintain session continuity.

NEW QUESTION # 25
You have configured the below commands on a FortiGate.

What would be the impact of this configuration on FortiGate?

• A. FortiGate will enable strict RPF on ail its interfaces and port1 will be enable for asymmetric routing.
• B. Port1 will be enabled with flexible RPF, and all other interfaces will be enabled for strict RPF
• C. FortiGate will enable strict RPF on all its interfaces and port1 will be exempted from RPF checks.
• D. The global configuration will take precedence and FortiGate will enable strict RPF on all interfaces.

Answer: C

Explanation:
The global setting enables strict source checking (RPF) on all interfaces by default. The per-interface setting disables the source check on port1, exempting it from strict RPF enforcement.

NEW QUESTION # 26
You have created a web filter profile named restrict_media-profile with a daily category usage quota.
When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.
What could be the reason?

• A. The firewall policy is in no-inspection mode instead of deep-inspection.
• B. The web filter profile is already referenced in another firewall policy.
• C. The naming convention used in the web filter profile is restricting it in the firewall policy.
• D. The inspection mode in the firewall policy is not matching with web filter profile feature set.

Answer: D

Explanation:
Web filter profiles with category usage quotas require the firewall policy to be in proxy-based (deep) inspection mode; if the inspection mode does not match this requirement, the profile will not appear in the drop-down list.

NEW QUESTION # 27
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver.
Which additional configuration can the administrator add to a deny firewall policy, beyond the default behavior, to block Remote-User2 from accessing the Webserver?

• A. Set the Destination address as Webserver in the Deny policy.
• B. Set the Destination address as Deny_IP in the Allow_access policy.
• C. Disable match-vip in the Allow_access policy
• D. Configure a One-to-One IP Pool object in a new policy.

Answer: A

Explanation:
To block Remote-User2's access to the Webserver, the deny policy must explicitly specify the Webserver as the destination address; otherwise, it denies traffic to all destinations, which is not the desired behavior.

NEW QUESTION # 28
Refer to the exhibit.

As an administrator you have created an IPS profile, but it is not performing as expected. While testing you got the output as shown in the exhibit.
What could be the possible reason of the diagnose output shown in the exhibit?

• A. FortiGate entered into IPS fail open state.
• B. There is a no firewall policy configured with an IPS security profile.
• C. Administrator entered the command diagnose test application ipsmonitor 99.
• D. Administrator entered the command diagnose test application ipsmonitor 5.

Answer: B

Explanation:
The output shows the IPS engine count as 0, indicating no active IPS engines are running. This typically means no firewall policy is referencing the IPS security profile, so the IPS profile is not being applied or triggered.

NEW QUESTION # 29
Refer to the exhibits.

The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)

• A. Administrators can change the configuration.
• B. FortiGate has entered conserve mode.
• C. Administrators can access FortiGate only through the console port.
• D. FortiGate drops new sessions.

Answer: A,D

Explanation:
Since memory usage is at 90%, exceeding the red threshold (88%), FortiGate enters a state where configuration changes are still allowed.
In this state, FortiGate drops new sessions to preserve resources and maintain stability.

NEW QUESTION # 30
A FortiGate firewall policy is configured with active authentication, however, the user cannot authenticate when accessing a website.
Which protocol must FortiGate allow even though the user cannot authenticate?

• A. LDAP
• B. DNS
• C. Kerberos
• D. TACASC+

Answer: B

Explanation:
DNS traffic must be allowed so the user can resolve domain names and reach the authentication server or web resources, even if authentication initially fails.

NEW QUESTION # 31
......

New FCP_FGT_AD-7.6 exam dumps Use Updated Fortinet Exam: https://validtorrent.pdf4test.com/FCP_FGT_AD-7.6-actual-dumps.html